30 Jan STEP 1: Download and Install VAG-COM KKL Drivers. (DO NOT connect cable to your computer yet. Only do this when you're instructed. Older Ross-Tech RS Serial interfaces can be set to power up as "dumb K- Line pass through" interfaces. This allowed those old Serial interfaces to be. If anyone still needs it, I zipped up the disk that came with my Ebay VAG-COM clone cable. Is has the USB drivers and you can download a.
Contact the vendor/seller of your 3rd party hardware, there is no generic driver - each interface vendor uses mostly own stuff and the 3rd party. Main VAG-COM and VCDS Lite Functions: *Reading and clearing DTCs from EVERY See below link for installing the USB driver, and see whether the. To get your interface up and running, you need to install software device drivers for the USB interface, and the VCDS-Lite software itself to connect to the car.
3 Oct Make sure you have already downloaded and installed VCDS on your PC before following these instructions. If you haven't yet downloaded. Now plug the VAG-COM USB cable into your PC. Windows will automatically detect the interface and attempt to find the correct drivers. 3. Extract and. 25 авг Instalacja VAG KKL USB OBD2 + VCDS-Lite - Windows 7 - #1 Driver Vag COM 1 Windows 7 vandanachemical.com%20Vag%.